6 series · Factory direct · MOQ 100–200 pcs per size
Screwdriver Bits, Woodworking Drill Bits & ACP Grooving Cutters
S2 screwdriver bits with magnetic ring, brad-point and counterbore woodworking bits, and V/U grooving cutters for aluminium composite panel — add-on lines for distributors who buy our drill bits.
MOQ
100–200 pcs per size
Lead time
20–30 days
Samples
Free, 5–7 days
Shipping
FOB Ningbo / Shanghai
Series
All Accessories & Woodworking Bits
Click a series for its full size table with catalogue codes.
DH-SB-M
Screwdriver Bits with Magnetic Ring
DH-SB-65
Screwdriver Bits 65 mm — S2 / D1
65 mm
DH-SB-110
Screwdriver Bits 110 mm — S2 / D1
110 mm
DH-J01
Woodworking Brad-Point Drill Bits (DH-J01)
10 – 25 mm
DH-CB
Counterbore / Hinge Boring Bits
CG-G
Aluminium Composite Panel Grooving Cutters (V / U)
Compare at a glance
| Series | Code | Shank / material | Diameter | Length | Sizes | PGM | |
|---|---|---|---|---|---|---|---|
| Screwdriver Bits with Magnetic Ring | DH-SB-M | S2 | — | — | 1 | — | Sizes → |
| Screwdriver Bits 65 mm — S2 / D1 | DH-SB-65 | S2 / D1 | — | 65 mm | 1 | — | Sizes → |
| Screwdriver Bits 110 mm — S2 / D1 | DH-SB-110 | S2 / D1 | — | 110 mm | 1 | — | Sizes → |
| Woodworking Brad-Point Drill Bits (DH-J01) | DH-J01 | — | 10 – 25 mm | — | 8 | — | Sizes → |
| Counterbore / Hinge Boring Bits | DH-CB | — | — | — | 6 | — | Sizes → |
| Aluminium Composite Panel Grooving Cutters (V / U) | CG-G | 6 / 8 / 12 | 95 × 20 × 8–10 mm | — | 1 | — | Sizes → |
Buying Information
How to order accessories from us
Everything a purchasing manager needs before sending an RFQ. If your situation differs — smaller trial order, special packaging, local certification — ask; most things are negotiable at the size-run level.
Request a Accessories QuoteMOQ
100–200 pcs per size
Mixed sizes per series accepted
Samples
Free samples for standard sizes, courier collect
Ship in 5–7 days
Lead time
20–30 days
+1 week for private-label artwork
Payment
T/T 30% deposit, balance before shipment
L/C at sight
Shipping
FOB Ningbo / Shanghai
CIF SG / MY / UAE / KSA on request
Packaging
Bulk carton · Blister card · Plastic case · Private-label retail box
Laser marking of your brand
Packaging & Private Label
Ship accessories & woodworking bits under your brand
From loose bulk cartons for wholesalers to retail-ready blister with your barcode. See the OEM / private label page for artwork requirements and MOQ per pack type.
Bulk carton
Loose in poly bags, 100–500 pcs per inner carton. Lowest cost for wholesalers who repack.
Blister card
Single or multi-piece blister with your artwork, barcode and language.
Plastic case / set box
4–17 pc sets in moulded case or window box, printed to your brand.
Private-label marking
Laser or stamp marking of your brand and size on the shank.
Display & POS
Counter displays and hanging strips for hardware stores.
Mixed containers
Mix SDS Plus, SDS Max, chisels and hole saws in one 20 ft container.
FAQ
Accessories buyer questions
What is the MOQ for accessories & woodworking bits?
100–200 pcs per size for accessories & woodworking bits. You can mix sizes within one series and combine accessories & woodworking bits with other lines in the same shipment.
How are the carbide tips attached?
By automatic brazing at 1200 °C on German MAHLER lines followed by furnace heat treatment of the body. This is the main difference between a bit that keeps its tip for the life of the flute and a cheap hand-brazed bit.
Can I get accessories & woodworking bits with my own brand?
Yes. Laser marking on the shank, printed blister cards, plastic cases and retail boxes are all available. Private-label orders start at 100–200 pcs per size; artwork approval adds about one week to the 20–30 days lead time.
How fast can you deliver accessories & woodworking bits?
Standard sizes ship in 20–30 days after deposit. Samples go out in 5–7 days, free for standard sizes with courier collect. FOB Ningbo / Shanghai; CIF to Singapore, Port Klang, Jebel Ali or Dammam on request.
What information do you need for a quote?
Shank type, diameters and total lengths (or just the codes from our size tables), quantity per size, carbide head preference if any, and packaging (bulk, blister, case or box). A photo of what you buy today also works — we match it.
Request a Quote
Get accessories & woodworking bits pricing per size, within 24 hours
Send sizes and quantities — or a photo of the bits you buy today. A sales engineer replies within 24 hours with FOB pricing per size, carbide head options and free sample arrangements.
- Emailsales@dehui-tools.com
- WhatsApp+86 153 9710 8718
- FactoryNo. 115, Furong Industrial Zone, Furong Town, Yueqing, Wenzhou, Zhejiang 325612, China
PGM-certified factory · MOQ 100–200 pcs per size · Free samples · Reply within 24h